There are so many different ways you can make a blanket ladder, and I have made a few different styles myself, but I think this is the most straight forward and easy way I have found!
Supplies list
- Miter Saw
- Finish Nail gun
- Nails
- Wood dowels (you will need 2 or 3 depending on how many slats you want)
- 1″x 2″ pine board (these are for the sides so you will need 2 of these)
- Wood Glue
Step 1
First thing you are going to want to decide is how tall you want your ladder and about how many slats you want to have. I made mine 90″ tall and cut my dowels to 11 3/4″ I wanted a thinner look with more slates so that’s why I picked those measurements. Once everything is cut lay out your pieces and decide how far apart you want the spacing to be, mine are 7″ apart. Then mark the side pieces so you know where to attach each dowel.
Step 2
Now to assemble it you will want to put a dab on wood glue on one end of the dowel, line it up with the mark you made on the side piece and carefully fire a nail into the wood. Attach each dowel to the piece of wood you are using for the sides of the ladder then repeating the steps until all your dowels are attached to one side. Once that’s done you can turn it on its side and attach the other piece of wood with the same steps!
Step 3
Sometimes you ladder can be slightly bent after its assembled and that is completely
normal due to the face that the wood isn’t perfectly straight most of the time. To fix this problem lay your assembled ladder on a flat surface and put some heavy objects on the top and the bottom and leave them there until your ladder is dry, I let mine sit overnight. Once the glue is dry its will stay in it’s new straight position. Now you can paint or stain it whatever color you like!
Hope you enjoyed this super easy and quick DIY Ladder!
-Grey Birch Designs-